Firing The Vindolanda Kiln

On May 31st I, with the help of two of the stalwart Vindolanda volunteers, fired the newly built replica Roman pottery kiln at the Vindolanda Museum: See my earlier post Roman Pottery Kiln and Workshops at Vindolanda.

44 pots of varying sizes were packed tightly into the chamber, tile/amphora sherds (actually roughly made curved slabs of fired clay) were then laid over the pack.  On top of this a very coarse mix of mud, gravel and organic material was spread and finally I plastered a mix of sand and clay over the surface, leaving three exit flues at the back of the kiln, through which hot gasses could escape.

I'd made the decision to attempt a black-burnished ware / greyware firing which involves starving the kiln of oxygen towards the end of the firing causing an intensely reducing atmosphere within the chamber.  This has the combined effect of pushing carbon deep into the pores of the clay and converting iron oxide within the clay body from its red Ferric form to black Ferrous oxide.  In the case of this firing this was achieved by closing down some of the exit flues for the last 200 degrees and, once we had reached the target temperature of 900 degrees, completely sealing the top of the kiln then stoking as much fuel as possible into the firebox and then sealing it closed.

The kiln was lit at 8:30am and we began sealing the kiln at 6pm giving a total firing time of nine and a half hours and an average temperature rise of 95 degrees per hour. Once begun, firing is a continuous process, even being distracted for a few moments can result in a temperature drop. As a 21st Century potter I have the advantage of an thermocouple and pyromenter (High temperature thermometer) my Roman predecessors would have had no such technology at their disposal.  Their temperature measuring techniques would have relied on their senses: in the early stages of firing a potter needs to take things very slowly, ensuring that trapped moisture in the clay doesn't blow his/her pots apart, a hand placed over the exit flue will give an indication of temperature and whether the gasses are moist or not; once the kiln is over 600 degrees C the colour of the pots in the chamber, seen through the exit flues will give the potter all the information they need.

I arrived to open the kiln at noon the following day and upon opening one of the exit flues was surprised to smell smoke, and by the level of heat emanating from the kiln. I realised that the fuel in the firebox had converted to charcoal and that, with the influx of oxygen caused by opening the seal, it was about to reignite.  We therefore opened the firebox and immediately raked out all the accessible fuel which did indeed immediately burst into flame. We then resealed the kiln because the pots were obviously too hot to unpack, unfortunately not having anticipated this turn of events, I had not brought the pyrometer with me and there fore while I knew it was hot, I didn't know how hot!  If fired pots are cooled through the 250 to 200 degrees stage too quickly they can crack, known as "dunting", this is caused by the fact that silica molecules within the clay rearrange themselves at 226 degrees, so it's safest to wait till the kiln is below 200 degrees to open it. After a trip to my workshop to collect the pyrometer, we returned to the kiln at 4pm by which time the temperature was 186 degrees  and the decision was taken to open it.

I think the results speak for themselves, everything was well coloured by the reduction, the variations from pale grey to black being very much in keeping with Roman originals.  If you'd like to own one of the pots from this firing watch the Vindolanda website and my Blog for news, or drop me an email and I'll let you know when they come up for sale.

Visit my website at www.pottedhistory.co.uk

Roman Pottery Kiln and Workshops at Vindolanda

I'm really excited about this new collaboration with Vindolanda Roman Fort near to Hadrians Wall, the first stage has been to create a reconstruction of a Roman pottery kiln as a permanent feature of the site. Built with the help of a very enthusiastic team of Vindolanda volunteers, the kiln is sited in the valley, beside the burn, near to the museum and visitor centre, so look out for it next time you're there.

This fully functional replica of a Roman up-draft pottery kiln, is based on information gained from the excavation of such kilns at archaeological sites across the North of England. The body of the kiln itself (1) is constructed entirely from a mixture of materials found on site, Clay, Earth and plant matter such as straw. The internal floor and central support, (2) also known as Kiln Furniture are made from specially selected clay which will survive repeated exposure to high temperatures.

While the kiln is cold, dry, raw pots are packed into the Ware Chamber (3) the top of the kiln is closed off with a temporary dome of clay and straw (4), leaving small holes as exit flues. A small fire is then lit in the Fire Box (5) allowing hot gasses and flames to pass through into the combustion chamber (6) then up through the ware chamber. Starting slowly and steadily building up the fire the the pots are brought up to a temperature of between 8000 and 10000 Centigrade.

The first firing took many hours of constant stoking as we not only needed to fire the pots, but to dry out the structure of the kiln itself. Nevertheless we achieved a temperature of between 700 & 800 degrees Centigrade, hot enough to fire the kiln load which included two amphorae.

This type of kiln would have been used by potters working in this region, to manufacture coarse wares such as Black Burnished Ware and Gray Ware cooking pots, indented bakers, plates, bowls, flagons and the like. While fine wares such as Samian Ware, Terra Sigillata and the Aphorae that carried produce around the empire would have been imported from production sites in Gaul and elsewhere in the Roman World.

The latest firing of this kiln is recorded here Firing the Vindolanda Kiln

From now on I will be running regular Roman pottery workshops at Vindolanda where you will be able to learn the techniques and skills that went into making the ceramics of the Roman Empire. Workshops and courses will include: Kiln Building & Firing; Samian Ware; Barbotine Ware; Black Burnished Ware; Lamps & Goddesses; The Potters' Wheel, Roman Head Pots. For more information on these workshops, follow me on Twitter @PottedHistory, visit the Vindolanda website or email me info@pottedhistory.co.uk.

Visit my website at www.pottedhistory.co.uk

Neolithic, Bronze-Age & Roman Pottery Making Classes/Workshops 2017

You may have seen me, in Further Tales from Northumberland on ITV, teaching Robson Green to make a Roman pot. You could do far better, (sorry Robson) if you join me on one of my one day pottery workshops coming up soon, email or phone to book:

Roman Barbotine Pottery Sunday  26th March 2017: Learn about this roman slip trailing technique and make your own Roman Hunt cup, or celebrate the Roman Circus by making Chariot Racing & Gladiator Cups. One day workshop £65

Roman Samian Ware - Saturday & Sunday  8the & 9th April 2017: Learn about the pottery that conquered the ancient world, by making your Roman pottery tools then creating a replica Samian Ware Bowl. Two day workshop £98

Prehistoric Pottery - Saturday  22nd April 2017
Learn the basics of Neolithic and Bronze Age pottery, making your own Prehistoric pottery tool kit then creating and decorating replica Beakers and Bowls. One day workshop £65

These workshops are designed for adults. No previous experience is necessary, but if you have made pots before or have an interest in archaeology, they will add to your skills and knowledge of the subject. They combine basic pottery making techniques and history, but most of all they are fun.

Contact me for further information:
Email; info@pottedhistory.co.uk
Phone; 01669 621238
Mobile; 07989871504
Twitter; @pottedhistory

Potted History
Gregory Court
Rothbury
Northumberland
NE65 7PJ

Visit my website at www.pottedhistory.co.uk

Roman Samian Ware or Terra Sigillata Pottery Workshop

Just had a great weekend running a Roman Samian Ware or Terra Sigillata workshop here in my Rothbury studio, and if you like the sound of it, you might like to join me on my next one. Email me if you're interested info@pottedhistory.co.uk.

A great group of participants have made their own set of Samian Ware punches based on designs from original archaeological finds. Punches were used by Roman potters; impressed into the inner surfaces of moulds in order to transfer their patterns onto decorated pots and bowls. That's exactly what the people at my workshop did, using their own punches along with some of my own to build up their own design. While some of the participants had a go on my momentum wheel, I'd made a blank mould for each of them, to ensure that everyone went home with a finished mould.

Now the next part of the process is to fire the moulds, but as it wasn't possible to get the moulds fired, as this can only be done after several days of drying, the participants used some of my own moulds for actually making their pot. As the mould spins quickly on the wheel, clay is firmly pressed into it to pick up all the decoration, then it is set aside to dry overnight. After a few hours the pot has dried to leather-hard and shrunk back from the mould, sufficiently to allow it to be removed. 

It now goes back onto the wheel, but this time upside down, a ring of clay is applied, shaped and smoothed to form a foot-ring. 

After drying again, the pot is dipped into the specially prepared colloidal slip, which dries to the beautiful satin sheen that makes Samian Ware so special. In addition to making some great replicas the participants learned about the history of Arretine and Samian ware, about the ceramic chemistry that makes this pottery so special, about the amazingly advanced kiln designs that made it so durable that it emerges from the ground looking brand new after two thousand years, about the slip trailing technique that decorated closed forms not suitable for mould making and hopefully much more.

Most importantly everyone had fun!

Visit my website at www.pottedhistory.co.uk

ONE DAY, HANDS-ON, POTTERY WORKSHOPS FOR KS2 & KS3 SCHOOLS

Teachers, if you want a workshop for your class that combines a history lesson, with the opportunity for every child to develop their creativity while making their own replica pottery artefact, then you need one of my workshops.

POTTED HISTORY – GRAHAM TAYLOR

ONE DAY, HANDS-ON, POTTERY WORKSHOPS FOR KS2 & KS3 SCHOOLS

ROMAN, ANGLO-SAXON, TUDOR, GREEK, EGYPTIAN, BRONZE-AGE, VICTORIAN and more

These workshops combine an art and craft activity with history and are a cost effective, real alternative to a field trip; I bring a living museum to you.  I present all workshops in period costume, using tools and equipment appropriate to the era.  The day begins working with the whole class using my extensive “Portable Museum” handling collection, which acts as a springboard to talk about many aspects of life in the period.  While many subjects are covered in an informative and sometimes humorous way, these are always pitched at a level appropriate to the age group, clear but never patronising.  I will demonstrate the ways in which the pots were made, which for all except the Bronze-Age workshop, involves throwing a pot on an ancient potters wheel, proven to mesmerise the most boisterous class.  Every workshop has a hands-on element allowing the children to express their creativity, while engaging in an activity that involves real technology from the period.  By the end of the day the children will have gained considerable additional information about the historical era covered and will have produced their own replica artefact to keep.

Other activities that can, on request, form part include Archaeological Challenges, which encourage the children to look closely at artefacts and discover the stories that they can tell us about the people of the past.

The knowledge and skills gained through these activities will equip the children to better appreciate what they see when the next visit a museum, and help them to understand that a potsherd isn't just a "bit of broken pot", it's a piece of the jigsaw of the past and a part of someone’s life.

The structure of the day would normally run as follows but can be tailored to your school day: 9am to break, handling collection and demonstration session with the entire class: After break the class is divided into two or three groups of 10 to 15 children, I work with one group before lunch and two groups after lunch, for approx. 40 minutes to 1 hour each, to complete the hands-on activity.  If time allows there will be a question and answer session at the end of the day, which can be planned to include parents if required.

Hands-on projects are as follows:

Egyptian:        Canopic Jar made from pre prepared pot or Shabti figure mould made

Greek:            Rhyton (Animal head drinking cup) from pre prepared pot

Prehistoric:    Hand built Neolithic bowl and animal/deity figure

Roman:           Roman Head Pot from pre prepared pot

Anglo Saxon: Hand decorated Saxon urn from pre prepared pot

Mediaeval:     Knight Jug from pre prepared pot or a Mediaeval encaustic tile

Tudor:            Bellarmine jar made from pre prepared pot

Civil War:       Slipware Plate/bowl made from pre prepared pot

Victorian:        Painted Plate made from pre prepared pot

The following give an idea of the structure of the day:

ROMAN

The Handling Collection includes:  Amphorae, Samian Ware, Barbotine ware, lamps, deity figurines, greyware, cooking pots, head pots, mortaria, altars, incense burners, votives, etc..

Which are used to lead a lesson covering:  Trade & produce, the empire, transport, the Roman army, Hadrian’s Wall, the gods, Roman Crafts, domestic life and much more.

The Hands-On Activity:  The children will make Head Pots, representations of gods on pots;  I will bring along one pre prepared soft clay vessel for each child, the children will then model these to represent a face.  At the end of the day the pots will be taken back to my studio, dried and fired to make them permanent.  Once they are returned to the school, usually after three to four weeks, they can be painted.  

Alternative Activities:  Making a Roman Altar or Making a Roman Samian Bowl (Useful if a quicker workshop is required)

GREEK

The Handling Collection includes:  Amphorae, Rhytons, Aryballos, Ostraka, Attic Wares, Votives, Military paintings, Deity Figures, Athlete Figures, Toys, Lamps, etc..

Which are used to lead a lesson covering:  Trade & produce, the arts, the Greek & Spartan armies, the navy, Olympics & athletics, democracy, domestic life and much more.

The Hands-On Activity:  The children will make Rhytons, animal headed drinking vessels;  I will bring along one pre prepared soft clay vessel for each child, the children will then model these to represent their own chosen animal, a handle will be applied.  At the end of the day the pots will be taken back to my studio, dried and fired to make them permanent.  Once they are returned to the school, usually after three to four weeks, they can be painted.  

Alternative Activities:  Aryballos making an animal shaped perfume bottle or Attic Bowl Painting on a pre prepared and fired Greek bowl.

Much larger projects can be designed and delivered, if you have any ideas for projects large or small please contact me.

Visit my website at www.pottedhistory.co.uk

Roman Antefixa for Grosvenor Museum

I've been making lots of replicas for museums and individuals in the past few weeks.  Today I sent out three Replica Roman Antifixa (Antefixes) which will become part of the new display at the Grosvenor Museum, Chester.  An antefix is a decorative terminal which finishes off the lower edge of a tiled roof, in this case a Roman roof covered with Tegula and Imbrex tiles.  From left to right they bear the following relief images:
The Boar emblem of the 20th (XX) Legion, the lion and Jupiter Ammun.  The making of these involved first calculating the shrinkage of the clay through each stage of the manufacturing process so that I could make punches, to make the moulds, to make the antefixa. Given the high quality moulding on the faces and the rather rustic approach to the rest of the decoration, I suspect that the faces may have been 'sampled' from something like a legionary standard.

Here you can see a set of Antefixa in place on a miniature Roman roof that I also made for the Grosvenor.

Visit my website at www.pottedhistory.co.uk

Potted History Public Events 2012

It's been a hectic summer and I've been all over the country demonstrating ancient pottery techniques, here are some of the main events I attended.

I had a great weekend at  the Bedford, River Festival on 21^st and 22nd July making replicas of ancient Greek Rhytons, Amphorae and Epinetrons. On Friday 3^rd August  I was on the Solway, at Senhouse Roman Fort, Maryport, Cumbria.  Demonstrating Roman pottery making with both the Potter’s Wheel and moulds, including the Senhouse Samian bowl. quite a few children had a go at making their own Samian Ware bowl.

On a very rainy Sunday 5^th August I was at Paxton House, celebrating Paxton "Before the House" with some Prehistoric, Neolithic and Bronze-Age pottery demonstrations.  I showed how the beakers discovered last year at Fishwick had been created, from the making of stone, bone and antler tools through processing the clay to decorating pots. I was joined by Kristian Pedersen the archaeologist leading the excavation, who demonstrated the ancient craft of flintknapping.

From Saturday 11^th to  Monday 19^th August, I worked my way along the middle section of Hadrian's Wall in the guise of Bellicus the itinerant Roman Potter demonstrating how the Romans made many different types of pottery and answering questions on how they used these pots.

Saturday 25^th to Monday 27^th August I was atop the dizzy heights of Dover Castle demonstrating Roman pottery making and giving children the chance to make a Roman Gladiator votive plaque.

Kirknewton Festival, in Northumberland on Saturday 1^st and Sunday 2^nd of September was an absolute joy and here you'd have found me  making and firing Prehistoric Bronze-Age pottery, While Paula Constantine demonstrated ancient spinning, dying and weaving.

On the 22nd & 23rd September I had my first opportunity to work at Beamish Open Air Museum.  In the wonderful surroundings of the Home Farm I made country slipware jugs, bowls and platters in the style of !8th and 19th Century potters.

And continuing the theme of Victorian Pottery on Sunday 30^th of September I’ll be at Preston Hall for their Parkmade Event, where I’ll be demonstrating the skills of a Victorian country slipware potter and even offering you the opportunity to have a go and possibly purchase some of my wares.

Visit my website at www.pottedhistory.co.uk

Some Recent Replicas

It's been a busy few months for replica making and these are a few of the pieces that I've recently made for clients:

Replica Early Bronze-Age Grape Cup and Fenestrated Vessel from Normanton Down in the Stonehenge landscape. These vessels are diminutive being only about 10cm in diameter but the complexity of the design makes them very time consuming particularly the Grape Cup.   

A late Iron Age wheel thrown bowl

An Iron-Age pot that is now residing in New Zealand 

Roman Gray & Parchment Ware

Visit my website at www.pottedhistory.co.uk

Replicas as Christmas Gifts

Over the past few weeks I’ve been working on a number of different replicas including Neolithic Carinated Bowls & Unstan Bowls, Bronze Age Beakers, Iron-Age Decorated Bowls & Roman Hunt Cups and these are now on display in Crown Studio Gallery, Bridge Street, Rothbury.  So if you need a special gift for the Archaeologist, Historian, Antiquarian or Re-enactor in your life, or even for yourself, I may be able to help.  Whatever festival you’re celebrating, be it Christmas, The Pagan Solstice, The Saturnalia, Dies Natalis Solis Invicti (The Birth of the Invincible Sun, Mithras), or any other mid Winter Festival, I should have something that will suit.  If you can't get to Rothbury just ask and I can post items to you.

I take a great delight in the idea that I'm part of a potting tradition that stretches back thousands of years and try to make and fire the pots in ways that the original makers would recognise.  I take even greater delight in the idea that the pots will be owned and used by someone who truly appreciates their heritage, and will use them as they were intended.

Visit my website at www.pottedhistory.co.uk

I'm working on stock for my trip to TORM (The Original Re-enactors' Market) next week, so today I've been making Roman barbotine decorated, colour coated, hunt cups.  This involves building up the relief decoration using very thick slip.  For absolute authenticity I'm using a cows horn and goose quill slip trailer!

Visit my website at www.pottedhistory.co.uk

The Eagles Have Landed Installation at Tullie House Carlisle

OK I'm going to try to catch up on some of the projects that I've been involved in over the past year, they might not be in chronological order but here goes.

First I have finally installed the sculptural piece that I made along with students from Burnside Business & Enterprise College at Wallsend.  (Click here to see my earlier post) It's situated in the Border Galleries, not in the new Roman Frontier Gallery and, if I do say so myself, I think it looks pretty good.

The piece features a Haltern70 Amphora pouring out coins across a map of the Roman World and represents the idea of Rome as a global commercial enterprise.  

The map itself is composed of terracotta fragments each one bearing the thumbprint of one of the students that made it.  Since the most common artifact on a Roman site is usually  the pottery sherd it seemed appropriate that the empire should be represented by this medium.

The coins bear the heads of emporers like Galba, Titus, Vespasian, and the provinces of the empire and beyond are named on embossed copper plaques.

The Amphora and the coins were fired in one of my Roman kilns and here you can see a pot full of the coins glowing red hot in the fire.

Visit my website at www.pottedhistory.co.uk

The Eagles Have Landed

I've been working with a group of students from Burnside College in Wallsend to create a piece of sculpture relating to trade throughout the Roman Empire.  It will consist of an amphora pouring a cascade of ceramic coins onto a map of the Roman World and will form part of "The Eagles Have Landed" exhibition at Tullie House, Carlisle.  The coins will stream out across the map in a network of trade routes.

We have made a two metre diameter map of the Roman World entirely composed of miniature terracotta thumb pots giving it the appearance of broken pots, representing the excavated remains of ancient Rome.

Each area and country will be labelled with a copper nameplate 

and the whole sculpture will be placed on a raised plinth.

We have made many hundreds of large ceramic coins and ........ it's getting pretty crowded in my workshop!

Visit my website at www.pottedhistory.co.uk

Kiln Floor in Production

You might be forgiven for thinking that it's National Boring Photograph Day but this pic does illustrate the fact that, while we are in the grips of winter here in Rothbury, work on the Roman kilns is going ahead.  These clay bars will form the floor of the firing chamber and will be laid, radiating out from a central support like the spokes of a wheel, allowing the flames to pass up from the firebox and combustion chamber, see Roman Sunken Kiln Under Construction below.

Kiln bars drying in the workshop

  I haven't been back to the Westhills kiln since my last blog on the subject and my work on the York kiln got rained off after three days.  In this time I did however get the sunken part of the kiln dug out and most of the raised chamber wall built and clay lined.  It's actually mixing the clay and soil that takes the time, if I was working on an actual Roman Pottery production site with a high clay content in the soil I would simply add water.  As it is the soil on site is mostly sand and builders rubble so needs careful sorting and clay adding to it.

York kiln - lining the chamber with clay

Visit my website at www.pottedhistory.co.uk

Roman Pottery Kiln Progress

Installed the Ware chamber floor today and started applying the clay lining.  Unfortunately there won't be any further work on it until Monday at least.

Visit my website at www.pottedhistory.co.uk